Photon Vision Setup

It’s important to note that only Raspberry Pi Imager versions 2.0.0 can properly image the microSD card. Not even Balena Etcher works anymore

Download Raspberry Pi Imager 2.0.0

Refer to this guide for the most part.

Plug your ethernet, camera, and power into the board.

Supposedly, the board has a solid red light and a blinking green light when it’s working. The green light indicates that the OS file has been booted, and the red light just tells us that the thing’s powered on.

For testing, you can also plug your HDMI cable from the OrangePi into a display. If nothing shows up, that means the image isn’t booted.

Go to http://photonvision.local:5800 once your setup is working.

If that fails, you can also try <IP_ADDRESS>:5800 before looking into alternative solutions